Product ID:LAVAX MACHINERY ENAMEL, 23-76
MSDS Date:01/09/1991
FSC:8010
NIIN:00N028102
MSDS Number: BMSFM

PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)

ONE PPG PLACE
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 412-434-3131

Info Phone: 412-434-3131

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

THE TYPE OF AIRBORNE CONTAMINANTS WHICH THE

RTECS: 9999999ZZ

EXPOSURE LIMITS, THE LEL BELOW STATED LIMIT & TO

RTECS: 9999999ZZ

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

PERSISTENT SKIN/EYE IRRITATION OR BREATHING

RTECS: 9999999ZZ

SILICA, CRYSTALLINE - QUARTZ;(CRYSTALLINE SILICA (QUARTZ))

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 15-20%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 10-15%

1);(CALCIUM CARBONATE).

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 30-35%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10 MG/M3

PIGMENTS

Fraction By Weight: 5-10%

SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC;(MEDIUM

CAS: 64742-88-7

Fraction By Weight: 2-5%

HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 35-40%

SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC;(MEDIUM

CAS: 64742-88-7

Fraction By Weight: 35-40%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 20-25%

PROD CNTNS CRYSTALLINE SILICA-QUARTZ WHICH IARC

RTECS: 9999999ZZ

TERM EXPOS TO CRYSTALLINE SILICA MAY ALSO LEAD TO

RTECS: 9999999ZZ

W/BRTHG EXCESSIVE AMTS OF SILICA DUST.APPLIC OF PROD

RTECS: 9999999ZZ

EYE

RTECS: 9999999ZZ

INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. REDNESS,

RTECS: 9999999ZZ

INDICATE EXCESS EYE CONTACT. DRYNESS, ITCHING,

RTECS: 9999999ZZ

EXCESSIVE SKIN CONTACT.

RTECS: 9999999ZZ

TITANIUM OXIDE;(TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:CAUSES
SEVERE IRRIT. SKIN:MAY CAUSE MOD IRRIT. INHAL:VAP/MIST MAY BE
HARMFUL IF INHALED. SANDING/GRINDING DUSTS MAY BE HARMFUL IF
INHALED. VAP IRRITATES EYES, NOSE, & THROAT. RPTD EXPOS TO HIGH
VAP CONC MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN/NERV SYS DMG.
INTENTIONAL MISUSE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE: NTP GROUP 2, IARC
GROUP 2A.
Effects of Overexposure:HLTH HAZ:BY DELIBERATELY CONC & INHALING
CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:AVOID LONG TERM/RPTD CONT.
CNTNS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF TITANIUM
DIOXIDE DEVELOPED LUNG TUMO RS. STUDIES W/HUMANS INVOLVED IN MFR
OFPIGMENT INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR
INHAL (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LEAST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED
BY WASHING W/SOAP & WATER. INHAL:MOVE TO FRESH AIR. APPLY ARTF RESP
& OT HER SUPPORTIVE MEASURES AS REQ. IF ANY OF FOLLOWING OCCUR
DURING/FOLLOWING USE OF PROD CALL POIS CTL CTR, EMERG ROOM, OR MD
IMMED. HAVE MSDS INFO AVAIL. INGEST:EXCESS EXPOS TO CORROSIVE
MATL.(ING 17)

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:0.9%
Extinguishing Media:NFPA CLASS B EXTINGS (CO, DRY CHEM/UNIVERSAL AQ
FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS II COMBUST LIQ
FIRES.
Fire Fighting Procedures:WEAR NOISH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE BUT MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILD-UP/POSS AUTO- (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON(SUPP DATA)

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED WITH PROPER RESPIRATORY PROTECTION SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATL WITH
SAWDUST, VERMICULITE, OR OTHER ABSORBENT MATL & PLACE INTO CNTNRS
FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTING MIXTURE
MAY HAVE HAZS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FRE E FALL IF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CNTRLS. VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
PAINT SPRAY OR AIR SUPPLIED RESPS MAY ALSO REDUCE EXPOS. READ RESP
MFRS INSTRUCTIONS/LITE RATURE CAREFULLY TO DETERMINE (ING 18)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOLUME & PATTERN
TO KEEP CONC OF INGREDS BELOW LOWEST SUGGESTED (ING 19)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:IGNIT OR EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER
IS USED, FOG NOZZLES ARE PREF. EXPLO HAZ:HOT SURFS. TOX GASES MAY
FORM WHEN PROD CONTACTED BY FLAME OR HOT SURFS. EFTS OF OVEREXP: OF
TITANIUM DIOXIDE DUSTS IS VERY LIMITED. SINCE OVEREXPS NOT
EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN. (ING 10)

HCC:F4
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.4
Evaporation Rate & Reference:17 (BUTYL ACETATE=100)
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
INGREDIENTS LISTED.
Percent Volatiles by Volume:<54

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED.WELDING/BRAZING/FLAME CUTTING ON SURFS COATED W/PROD MAY
PRODUCE FUMES INCL:CO.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.